Raynor ControlHoist™ Basic is a 1/2 horsepower, belt-drive door operator, perfect for operating smaller-sized sectional doors, rolling doors, and grilles. This entry-level door operator is loaded with innovative features along with a durable construction suitable for most commercial applications.
The CMJ door operator model is designed for use on vertical lift and lift clearance sectional doors or small rolling doors and grilles. The door operator can be wall or hood mounted on either side of the door. It incorporates a floor-level disconnect mechanism for manual operation.
CMH is designed for use on vertical lift and lift clearance sectional doors or small rolling doors and grilles. The operator can be wall or hood mounted on either side of the door. It incorporates the patented Hoist-a-matic®, a self-engaging chain hoist for manual operation, which simplifies operation and installation.
The CMT door operator model is designed for use on smaller and low-cycling industrial standard lift sectional doors. It features a high starting torque limited-duty industrial type motor and a quick release disconnect arm.
CMJ – A floor level disconnect mechanism that must be engaged for manual push-up operation.
CMH – Hoist-a-matic® self-engaging hoist (floor level engagement device is not required to operate) for manual chain operation. An electrical interlock automatically disconnects power to the motor operator when the chain hoist is engaged. The hoist on right is standard.
CMT – Quick release disconnect arm for manual push-up operation.
Mechanical Brake: Built-in mechanical brake system helps to prevent the door from drifting and adds security by preventing forced opening.
Entrapment: UL 325 2010 requires all commercial operators to use constant pressure to close or be equipped with an approved monitored entrapment protection device, such as a monitored photo eye or reversing edge. All ControlHoist commercial operators are provided standard with constant pressure to close. In addition, a non-monitored entrapment device can also be selected.
Drive Reduction: Primary reduction is a belt drive. Secondary reduction is by chain and sprocket.
Adjustable Friction Clutch: Helps to protect the door and operator from damage should it come into contact with any obstruction.
Corrosion Protection: Frame and control enclosure protected by baked-on, long-lasting enamel finish. All shafts protected by yellow chromate coating.
Accu-cam® Limit Feature: For precise and quick one-handed limit setting adjustments.
Cycle Counter: LED clearly indicates the number of cycles logged for easy maintenance support.
Programmable Mid-Stop: This feature enables partial opening of the door to a preprogrammed position for energy savings, time savings, and convenience.
Timer-To-Close: Closes the door automatically after a predetermined amount of time has elapsed, for security and convenience.
Exterior Radio Control Terminal: Provides for fast and easy connection of radio controls. When range is an issue, an externally mounted radio receiver allows the flexibility for the receiver to be moved to a new location for improved range.
3-Button Control Station: This station provides open/close/stop functions.
|Operation Mode||Trolley or Jackshaft (optional Hoist)|
|Duty Cycle||14 Cycles/Hour or 50 Cycles/Day|
|Operational Speed||8″ to 12″ per second|
|Environmental Options||NEMA 1|
|Motor||½ HP, 60Hz limited-duty open type motor with 1.5s delay on reverse and internal automatic reset thermal overload protection.|
|Circuit Board||Solid State Logic with diagnostic LEDs|
|Warranty||3 years with the purchase of a door 2 years with the purchase of operator only|
|Raynor Advantage||Easily configure the correct operator with a door for a total Raynor branded system with an extended extra year of warranty.|
Raynor warrants the electrical operator and component parts for two (2) years against defects in material and workmanship.
Raynor warrants the electrical operator and component parts against defects in material and workmanship for three (3) years, on the operator only, when purchased with any model of Raynor commercial sectional or rolling door.
Under the terms of this limited warranty, for any operator components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor Dealer. This warranty applies only to doors that are professionally installed by an authorized Raynor Dealer.
This warranty extends only to the original purchaser. This warranty is not transferable.
This warranty does not apply to any damage or deterioration caused by abuse or failure to provide reasonable and necessary maintenance.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.